More and more people these days are jumping ships from the conventional and traditional tool used for central heating in Austin, the furnace, to heat pumps. Why? Well, one of the reasons is that heat pump technology has come a long way and now modern heat pumps offer one of the best and most efficient ways to get heat into your home. Another benefit is that unlike furnaces, heat pumps perform both the heating and the cooling needed in a home, essentially replacing two HVAC units, the air conditioner and the heater, with one.
But still, for many, much is misunderstood about the heat pump. How they work, how to keep them healthy, and how to search for the best one for you are all questions that remain in the air for the majority of the uninitiated. So today we’re going to look at one aspect of heat pump ownership in detail, maintenance. We’re going to look at what a heat pump owner should know about their device, how it works, and how to maintain it so that it will provide them with energy-efficient Austin heating throughout this winter and many more to come.
How They Work
Before we dive into the tips it will be helpful to have a little working knowledge of just how heat pumps work so that you can have a baseline level of understanding of what is going on under the hood. Heat pumps are efficient systems because they do both the cooling and the heating for your home all in one. In the warmer months, heat pumps take heat out of the air in the house and vent it outside. In the cooler months, heat pumps take warmth from the outside and pump it into the house. Almost all heat pumps distribute warm or cool air through forced-air delivery systems, aka ductwork in the house.
There are two common types of heat pumps, air sourced and ground sourced. Air sourced heat pumps operate as their name suggests and they draw their heat from the air outside during the cool months and move it inside. Ground sourced heat pumps use the heat from the earth below your home and as this is more stable temperature wise ground sourced heat pumps are more efficient. They’re less common however due to the fact that they are more expensive and taxing to install.
Heat pumps have two main components, an indoor unit that acts as an air handler and an outdoor unit that looks a lot like your standard air conditioner but is referred to as the heat pump. Think of a heat pump as a heat transporter constantly moving warm air from one place to another, to where it’s needed or not needed, depending on the season. Even in air that's seems too cold, heat energy is present. When it's cold outside a heat pump extracts this outside heat and transfers it inside. When it’s warm outside, it reverses directions and acts like an air conditioner, removing heat from your home.
Your standard heat pump doesn’t require a lot of parts. In fact, it’s typically made up of the following components: refrigerator coils, a compressor, a reversing valve and two fans. The key to the heat pump is the refrigerant. Like an air conditioner, the refrigerant absorbs heat and then releases it. The main difference is that the reversing valve can change the direction of the refrigerant depending on whether the machine is trying to take heat outside from in or take heat inside from out.
When it comes to heat pumps, the way you’ll be interacting with it the most often is through the usage of the thermostat. Some ways of using this device are better for your heat pump and your utility bill then others. Here are a few things to keep in mind if you’re trying to maximize the efficiency and lifespan of your heat pump.
Try to not adjust the temperature setting too much. Frequent temperature changes puts more of a strain on the heat pump than necessary and the constant adjusting can cause higher utility costs, especially in the winter. It’s better to either pick a good compromising temperature that is warm enough to be comfortable but no more or to use a programmable thermostat so that the heat pump runs less when everyone is out of the house or sleeping. Try to limit these programmed temperature changes to twice a day. The less adjusting the heat pump has to do the better. Doing so will also maximize the savings on your energy bill.
A good rule of thumb for programmable thermostat settings is to set the temperature around 5 degrees colder in the heating season when it is in conserving mode. And of course everyone’s comfort level is a little different but general it is considered wise to try to keep your thermostat set no warmer than around 65 to 68 degrees in the fall and winter and no cooler than 70 in the summer and spring.
One of the most important and easiest maintenance tasks you should be doing in order to preserve the energy efficiency and health of your heat pump is to regularly check and change the air filter. The air filter is a rectangular piece of equipment that is located directly behind one of the intake air vents in your house. It filters the air that flows through the system and removes unwanted particles and potential contaminants in the air. This makes the indoor air quality better and keeps dust and other debris that could wear down the heat pump out of the vents.
But air filter get dirty fairly quickly and need to be replaced at regular intervals. How often is going to depend on the air filter so you should check the manufacturer’s instructions but generally it is recommended that you inspect your air filters every month or two. It’s as easy as opening up the intake air vent with a screwdriver and taking the filter out. Check it to see if it is dirty. If you can’t see through the filter then it is probably time to change it out.
Make sure you purchase a new filter with the same dimensions as the old one. If you do this every month or two you can rest assured that your heat pump isn’t getting an excess of dust and debris clogging up its parts and causing damage.
Outdoor Unit Maintenance Tips
Every heat pump consists of a system that includes both an outdoor unit and an indoor unit. There are certain considerations when talking about the outdoor unit that need to be made in terms of maintenance. Here are some tips that are specific to the outdoor unit of your heat pump.
Make sure there is ample space around the unit. Keep shrubs pruned back at least 18 inches from all sides of the heat pump. This is to allow for proper airflow and servicing. Keep things like leaves and other debris out of this area around the heat pump as well. Obstructions and things of this nature can get into the indoor unit and cause it to overheat.
The largest component in the outdoor unit is the condensing coil (you can see the coil’s narrow metal fins through the unit’s casing). While the unit sucks in air, it unfortunately also pulls dirt, grass, pet hair, etc. into those fins. Keeping it clean and free of obstructions is as critical as keeping clean filters in your home. The consequences of a dirty outdoor unit are the same as those listed for dirty filters, including home warranty claim denial for lack of maintenance. The coil can be cleaned and this doesn’t require the help of a professional if you’re willing to be cautious and thorough. Lightly spray the coil with water to get started. You can manually remove clumps of hair or debris, but use work gloves and work gently as the fins are sharp and are easily bent.
Protect the outdoor unit by putting up a barrier (such as latticework). Make sure you allow at least 12 inches of clearance on all sides. Also, make sure there are no obstructions within 5 to 6 feet above the unit to allow for proper airflow from the fan. This protection is also useful and perhaps even vital if you have pets. Pet urine can be extremely damaging to the coils in the outdoor unit so having a protective barrier up that prevents your pet from using the outdoor unit as a bathroom can save you a big headache and repair costs in the future.
Indoor Unit Maintenance Tips
Of course just as there are things you can do to help maintain your outdoor unit there are tips you can follow when it comes to the indoor unit as well. Aside from producing conditioned air, furnaces and heat pumps also produce condensation. This water collects in the drain pan at the base of the indoor unit and is subsequently pumped out of your home via a condensate pump and condensate tubing. Gunk can build up in the condensate lines, caused by mildew and dirt that has passed through dirty filters. When the condensate line becomes clogged, water will leak from the base of the unit. This results in flooring, property, and ceiling damage.
Full proper maintenance will require the help of a professional but there some basic cleaning tasks you can take on yourself to help maintain the health of your heat pump’s indoor unit. For example, you can clean your condensate lines by pouring about 1/4th of a cup of bleach into your drain trap (look for the PVC cap coming from the indoor unit). This same strategy can be applied alternately to the condensate pump itself. This is the rectangular box located near the base of the indoor unit. Most have around access hole & plug. Gently remove the flexible condensate tubing that comes from the pump, and blow into it.
Another important consideration to keep in mind is that during the heating season your heat pump itself is going to be operating at a pretty high temperature. That means there is a fire risk that can be significantly lowered by careful consideration of what is around the indoor unit. Keep all flammable materials away from your indoor unit.
Heat Pump Maintenance and Heating Repair in Austin
As you can see, there is plenty that the average heat pump owner can do to maintain and take good care of their heater so that the risk of repairs being needed is minimal the energy efficiency of the unit stays high. Regular cleaning and changing of the air filter are two of the most important and relatively simple tasks you can do. Of course, if you really want your heat pump to remain efficient and healthy for a long time the best thing you can do is call a professional Austin heater repair company like AC Express and get a full preventative maintenance check done.
AC Express does heater installation and heater repair in Austin and the surrounding areas, such as Leander, Lakeway, Round Rock and Georgetown. If you’re looking for top-notch heating service in Austin this winter, look no further.